The proven design of the Alphacool Laing top meets the future: Extreme highflow with 3/8” (0,9525cm) connection threads

This top replaces the black standard cover of the Laing DDC-1T and Laing DDC-1Plus pumps and adds many additional and very useful features. One of the most important is the use of 3/8” threads which makes you independent of the barbs on the original cover. The use of 3/8” threads, which have a much larger inner diameter than the common 1/4” (0,635cm) threads on Laing covers, also makes this cover the ultimate choice for highflow applications.

Rebuilding of the pump to use this cover is easy: Simply remove the 4 screws at the bottom of the pump and lift off the original cover. Then insert the 4 included screws instead of the original ones and put the cover on top of the pump. Simply tighten the screws and you are set to go!
To ensure a safe seal of the cover simply leave the original O-ring gasket in its place during installation.

Optionally this cover also offers the possibility for decoupled installation of the pump in a 3,5” drive bay. For use of this feature only one of our decoupling kits (Model.: E506) is required to allow quick, compact and decoupled installation of the pump.

This cover is also the basis for installation of a reservoir on this pump. The optional reservoir, available at the product model E127, can simply be screwed onto the cover and the coling loop comes to life!

Technical specifications:
Dimensions (LxWxH): 80 x 80 x 20
Material: Röhm Plexiglas GS
Connection thread size: 2x 3/8”
Side mounting threads: 4x M4

Includes:
1x Plexi top HF 38
4x Stainless steel screw M4x25mm
1x Screw plug G3/8“
1x Allen key 2,5mm